Overview

The 608C Facility Controller is designed for applications such as Oil Production Facility Monitoring and Control. Automation Electronics Facility Controller

Automation Electronics Facility Controller

The RTU uses the time tested 608C Embedded Controller as a communication and application program processor. The 608C communicates with Automation and Electronics, Inc. family of Smart Networked I/O Modules to access all Input/ Output devices. In addition, the user can access and configure the unit via a low cost Local Operator Interface. Data is transmitted bidirectionally to a remote Host Computer with Automation and Electronics, Inc's AutoCom Protocol.

Features

Low Cost and High Density RS-485 Networked I/O Modules
Direct Turbine Meter Inputs
Microsoft® CE based Operator Interface Unit
Low Speed Accumulator Inputs
PID Control Modules
AGA-3 Meter Gas Flow Calculations
Compatible with OPC Data Access 2.0 families of Host SCADA software from Case Services Cs and SAMS.
Compatible with SAMS Host SCADA Software

Applications

Tank Battery Monitoring
Compressor Station Monitoring and Control
Oil Production Facility Monitoring and Control
Automatic Well Test
Second Source RTU for existing Facility RTUs.