Displays

Login Screen

The operator logs onto the system with their id and password in the first screen. The shift is also set here.

Tracking Screens

TruckPro presents the operator with a loading information screen, along with a dumping location screen. The payload weight is read from an on-board sensor which is integrated with the TruckPro system.

The pit and seam are filled in with the location extracted from the main navigation screen when the operator selects the record load location as seen in the next section. These values are all editable from these screens in case an override is needed.

Main Screen

In the center of the TruckPro main screen, there is a map with current position and other routes taken through the shift. It shows both the pit and dumping locations. The seam quality is changeable on the right side of screen. To the upper left, the user is allowed to: set delays and record load locations. On the left, Travel indicates the distance traveled since login and LastGPS is the time in seconds since the last good GPS reading.

The GPS status is displayed to the lower left along with a running total of loads and tons. The zoom buttons at the bottom of the screen allow the operator to view more or less of the map.

The "Set" items include:

Seam - These are user defined, but some examples include: coal, overburden, and scoria.

Delay - These are user defined, but some examples include: lunch, maintenance, and shift change.

Portions of this document come from Carlson Software Product Briefs.